Loading... Please wait...

Schneider (TAC - Invensys) MA-418 - Submerged Actuator, Two-Position Application

Hover over image to zoom

8.00 LBS
Usually ships the same business day if ordered before 3:00PM eastern time
Calculated at checkout

 Product Description

The TAC-Invensys MA-418 submerged actuator, is for Two-position operation of damper, valves, and other equipment which require the return to normal position upon power interruption. The TAC-Invensys MA-418 includes spring return, rugged die cast aluminum with two 1/2-inch conduit openings, an oil immersed motor and gear train, and is compatible with most SPST control devices.

Product Specifications

Power Supply 120 VAC (60 Hz)
Auxiliary Switches SPDT makes (or breaks) circuit at powered end of stroke.
Input 70 W (Running) 25 W (Holding)
Running Power Consumption 108 VA
Holding Power Consumption 42 VA
Rated Torque 60 lb-in
Rated Torque 6.8 N-m
No Load Timing at 75°F (24°C) 20
Nominal Damper Area (Parallel) 33 ft2
Nominal Damper Area (Parallel) 3.1 m2
Nominal Damper Area (Opposed) 43 ft2
Nominal Damper Area (Opposed) 4 m2
Control Circuit Two-Wire
Shaft Rotation CW 170° when power is applied.
Spring Return Direction CCW to original position when actuator is de-energized
Ambient Temperature Limits (Shipping & Storage) - 40°F to 136°F (- 40°C to 58°C)
Humidity Ratings (Non Condensing) 5% to 95%
Environmental Location NEMA Type 4 with gasket (provided) and water-tight conduit connectors (not provided) installed.
Connections Coded screw terminals
Case Die cast aluminum with two 1/2" conduit openings.
Base Actuators Dimensions (H x W x D) 5 3/4" x 5 3/8" x 6 9/16"
Base Actuators Dimensions (H x W x D) 146 mm x 136 mm x 167 mm
Hazardous Location Actuators Dimensions ( H x W x D) 8 7/8" X 8 1/2" X 10 5/8"
Hazardous Location Actuators Dimensions ( H X W X D) 225 mm x 216 mm x 167 mm
Damper Linkage AM-111 Crank arm for 5/16" diameter damper shaft
AM-112 Crank arm for 3/8" diameter damper shaft
AM-113 Crank arm for actuator or 1/2" diameter damper shaft
AM-115 Crank arm for 7/16" diameter damper shaft
AM-116 Splined crank arm for actuator
AM-122 Linkage connector straight type
AM-123 Damper Clip
AM-125 5/16" diameter x 20" damper rod
AM-125-048 5/16" diameter x 48" damper rod
AM-132 Ball joint connector
AM-161 Damper linkage kit
AM-161-1 Damper linkage kit
AM-301 90° mounting bracket (except MA6, MA7, MA8-XXX)
Mounting Allow 6" (152 mm) clearance behind the actuator wiring compartment. Outright Shaft Horizontal
Application Damper and Valve Actuators
Valve Linkage AV-29 & AV-300 2 1/2" & 3" VB-9323
AV-391 1/2" to 1 1/4" VB-92XX or VB-93XX
AV-392 1 1/2" & 2" VB-92XX or VB-93XX
AV-395 2 1/2" to 4" VB-92XX or VB-931X

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


Contact Us

Energy Equipment Controls, LLC
495 Business Park Lane
Allentown, PA 18109
Phone: (610) 437-9715
Toll-Free: 800-360-3324
Contact Us

Copyright 2018 Energy Equipment Controls, LLC. All Rights Reserved.
Sitemap | Privacy Policy | Terms of Use

Click the button below to add the Schneider (TAC - Invensys) MA-418 - Submerged Actuator, Two-Position Application to your product list.