Honeywell Y8610U4001

Price: $182.76
On Sale For: $152.99

Honeywell Y8610U4001
(Need More Information? Click Here to visit the Honeywell website.)

Complete kits converting conventional standing pilot system to intermittent pilot system. For use with 24 Vac gas-fired atmospheric furnaces, boiler and heating appliances.

Retrofit intermittent ignition system, non-lockout type. S8610u, vr8204a, 1/2 by 1/2, 3.5 in. Wc, o f., nat. Gas.

Features

• Y8610U kits are for use with natural or LP gas: provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated.
• Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed.

Product Specifications

Description

Provide electronic control of intermittent pilot ignition systems used on gas fired furnaces, boilers, and other heating appliances.

Ignition System Type

Intermittent Pilot

Ignition Sequence

Continuous retry, after trial for ignition, pilot gas shuts off for 5 minutes, then another trial for pilot ignition takes place

Typical Gas Control

VR8204, VR8304

Type of Gas

Natural or LP

Flame Sense

Single Rod or Two Rods

Ignition Source

Internal high voltage spark generator

PrePurge

0 or 30 seconds

Ignition Trials To Lockout

continuous retry

Lockout Timing

15 or 90 seconds

Ignition Trial Time (sec)

15 or 90 seconds

Maximum Valve Load @ 24 Vac (Amps)

1A Pilot, 2A Main @ 24Vac

Typical Ignition Hardware

Q345, Q3451

Dimensions (in.)

3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep

Dimensions (mm)

100 mm high x 138 mm wide x 67 mm deep

Electrical Ratings

24 Vac

Frequency

60 Hz

Maximum Ambient Temperature (F)

-40 F to +165 F

Maximum Ambient Temperature (C)

-40 C to +74 C

Includes

VR8204A2142 valve (1/2 x 1/2; 3.5" WC setting; 150 kBtu/hr at 1" p.d.)

Flame Failure Response Time (sec)

2.0 sec