Johnson Controls AS-UNT111-1   (Need More Information? Click Here to visit the Johnson Controls website.)

The Johnson Controls AS-UNT111-1 Unitary (UNT) Controller is an electronic device for digital control of heat pumps, unit ventilators, packaged air handling units, fan coils, and other terminal units serving a single zone or room. You can easily configure point inputs and outputs and software features to control a wide variety of HVAC equipment applications. You may use the AS-UNT111-1 as a standalone controller or connected to the Metasys Network through a Network Control Module (NCM), N30, or Companion Supervisory Controller. It can also be configured as a generic input/output device for basic point monitoring applications when used within a Metasys Network.

Features

The AS-UNT111-1's standalone control enhances system reliability and includes isolated N2 circuitry for more reliable operation, along with an LED indicator for Power/Zone Bus to provide visual indication of proper system function. The removable N2 and 24 VAC power plugs allow disconnection of an individual controller without disrupting other controller connections and the built-in control program library within HVAC PRO software tool allows for easy configuration. Network communications over N2 bus provide facility-wide control efficiencies and cost effective sensor sharing while multiple modes of operation for various occupancy conditions provide comfort with economy.  Multiple packaging options for both field and factory allow for installation flexibility.

Application/Software Options

APPLICATION OPTIONS	SOFTWARE OPTIONS
Primary Equipment Types	Unit Vents, ASHRAE Cycle 1, ASHRAE Cycle 2, ASHRAE Cycle 3, ASHRAE Cycle W, Heat Pumps, Water to Air, Air to Air, Packaged Rooftops, Fan Coils
Primary Control Strategies	Room/zone control
Economizer Changeover Strategies	Dry bulb, Outside air enthalpy, Differential outside/return air temperature, Binary input from external economizer, Supervisory network command
Mixed Air Control Strategies	Proportional output to OA/RA damper actuator,  Binary output to economizer actuator
Heating/Cooling Configuration	Modulated single coil, Staged (2-stage max), Modulated common heating/cooling coil, Reversing valve logic
Fan Start/Stop	Continuous Operation, Cycled with call for heating/cooling
Lighting Control	On and off outputs to lighting relay in conjunction with Occ/Unocc mode
Unoccupied Control	Setup and setback, morning warmup and cooldown
Pump Led / Lag	Lead/Standby pumps with common or separate flow switch(s)

Product Specifications

Termination Type	Spade Lug
Analog Inputs	6 RTD Temp. Elem. (NI, SI or PT) 0-10 VDC Trans. 2K ohm Setpoint Potentiometers
Binary Inputs	4 4-Dry Contacts 1-Momentary Push Button at Zone Sensor BI4-Accum. Input
Analog Outputs	2 0 to 10 VDC at 10 mA
Binary Outputs	6 24 VAC Triacs at 0.5 amps Low or High Side Common Selectable
Ambient Operating Conditions	0 to 60°C (32 to 140°F) and 10 to 90% RH
Dimensions (H x W x D)	165 x 163 x 56 mm (6.5. x 6.4 x 2.2 in.) without enclosure 173 x 185 x 119 mm (6.8 x 7.3 x 4.7 in.) with enclosure
Ambient Storage Conditions	-40 to 70°C (-40 to 158°F) 10 to 90% RH
Power Requirements	24 VAC, 50/60 Hz at 40 VA (per typical system)
N2 Bus	Isolated
Zone Bus	8-Pin Phone Jack or Terminal Block on Controller
Shipping Weight	0.64 kg (1.4 lbs)
Agency Compliance	CSA C22.2 No. 205, FCC Part 15, Subpart J, Class A, IEEE 446, IEEE 472, IEEE 518, IEEE 587 Category A, UL 916, UL 864; NEMA ICS 2, Part 2-230, VDE 0871 Class B
Agency Listings	UL Listed and CSA Certified as part of the Metasys Network