Fireye E110   (Need More Information? Click Here to visit the Fireye website.)

The Fireye® E110 FLAME-MONITOR™ System is a microprocessor-based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas, and combination fuel burners. Together with limit and operating controls, the E110 programs the burner/blower motor, ignition and fuel valves to provide proper and safe burner operation. The control also provides current operating status and lockout information in case of a safety shutdown. Information displayed is dependent on the type of programmer (EP or EPD) and display module (ED510 or ED500).

The E110 consists of the EB700 chassis, dust cover, and shortened mounting screw (P/N 48-1836). The display module (ED510), if required, must be ordered separately. The interchangeable programmer and flame amplifier modules allow for a wide selection of control function, timing, and flame scanning means. Functions such as pre-purge, recycling interlocks, high fire proving interlock, and trial for ignition timing of the pilot and main flame are determined by the programmer module. The E110 Flame-Monitor can be used with ultra-violet, auto-check infrared, flame rod, or self-check ultraviolet flame scanners simply by choosing the appropriate amplifier module.

The eighteen terminal wiring base allows for many operative circuits including motors, valves, and ignition transformers. Included in that list as well are multiple interlocks such as high purge, low purge, fuel valve and running interlock circuits. The E110 uses the same wiring base as the Fireye E100 Flame-Monitor control, D- and C-Series Controls, and is directly interchangeable with most models without rewiring.

Additional functions of the Flame-Monitor system include a non-volatile memory which allows the control to remember its history and present position even when power is interrupted. A constant flame signal read-out via display module or 0-10 VDC output (EPD programmers only). Readouts of main fuel operational hours and complete cycles are available via the display module. Modbus communications are via a RS485 multi-drop link. Dipswitches are located on the EP programmer in order to allow selectable purge time. A run/check switch allows the operator to stop the program sequence in any of three different positions (Purge, PTFI, or Auto). The E110 contains Remote Display Capability. You may add 16 additional interlocks using the E300 Expansion Module.

Supply Voltage:	120 VAC (+10%, -15%) 50/60 Hz
Power Consumption:	25 VA
Shipping Weight:	(E110 Approx.) 5 lbs. (2.3kg)
OPERATING TEMPERATURE LIMITS
MAXIMUM	140°F 60°C
MINIMUM	- 40°F - 40°C
Humidity:	85% R.H. (Non-condensing)

Approvals

Underwriters Laboratories Inc.
MCCZ File MP 1537

Controls, Primary Safety - Listed
MCCZ2 File MP1537

Controls, Primary Safety - Component
MCCZ7 File MP1537

Controls, Primary Safety Certified for Canada
MCCZ8 file MP1537

Controls, Primary Safety Certified for Canada - Component

Acceptable by: Industrial Risk Insurers (I.R.I.)

Factory Mutual Approved
Fireye E110 Control, consisting of EB700, 48-1836, EC600. 120 VAC. Display ordered separately. UL, FM, CSA Approved.